HYPER STRONG
HyperStrong ranks the First in Chinese Energy Storage Market for Three Consecutive Years
Source: CNESA
HyperStrong won NO.1 BESS System Integration (SI) in 3 consecutive years since 2020 – 2022
Founded in 2011, Beijing HyperStrong Technology Co., Ltd. is a leading energy storage system integrator and system service provider, focusing on the development, design, integration, and operation of energy storage systems. Targeting different scenarios, we provide a whole series of energy storage products and one-stop solutions for clients engaged in traditional power generation, new energy, smart grid, end-user and smart micro grid, etc.
National High-Tech Enterprise
Hyperstrong was established in 2011 and in 2013 was awarded as "National High-Tech Enterprise"
Beijing Enterprise Technology Center
In 2017, Hyperstrong won the bid of 200 MWh BTM BESS project
National "Little Giant" Enterprise
In this year 2021, BESS project accumulated installation exceed 2GWh
Beijing Electrochemical Energy Storage System Integration Innovation Center
In 2022, awarded as Beijing "Unicorn" Enterprise
years BESS R&D experience
HyperStrong has 35% Research and Development (R&D) Engineer of all employees
GWh BESS deployed
HyperStrong has delivered over 8GWh System Integration
BESS projects experience
and application projects in the past decade, with dozens of large-scale energy storage power station projects at or over 100MW/200MWh.
GWh annual production capacity
from 3 factories in China.
The HyperStrong factory has a degree of automation of more than 85% and is automated through more than 10 processes such as cell feeding, OCV testing, plasma cleaning, cell gluing, and module stacking. Robots and AGVs are widely used in transportation to greatly improve product quality and production efficiency.
HyperStrong has a leading intelligent module production line embedded with CAPP and APS management systems.
A variety of built-in scheduling strategies and intelligently optimized production plans adapt to complex and changeable process routes and greatly improve production efficiency.
HyperStrong uses the industrial internet platform and IOT technology to realize the interconnection of production and testing equipment, and integrates with ERP, MES and other management systems through modern digital technology to realize factory resources, process design, production management, equipment management, planning management, energy consumption management and logistics.
Discharge during peak time and charge during valley time. Shifting energy consumption from one moment to another reduces the load price.
HyperStrong keeps up the production upgrading towards intelligent manufacturing, building two manufacturing bases and combining smart production lines, smart warehousing, and smart logistics.
- PV+BESS
- Balance the flow of renewables to the grid by storing and discharging energy.
Postpone costly grid infrastructure upgrades by storing power.
Stabilize voltage levels by absorbing reactive power and adjusting output.
The battery system is able to power the load off-grid.
Get profit by Responding demand of grid, selling electricity to the grid.
– Acupuncture test
– Short-circuit test
– Overcharge test
– Short-circuit test
– Isolation pressure test
– Overload temperature rise
– Structural strength
– Vibration test
– Structural design short/long term test verification
– System structure simulation
– EMC test
– Fault recording test
– Hardware-in-loop simulation test
– Thermal runaway spread
– Muti-dimensional perception detection test
– UL9540A certification test
– Temperature shock & humidity cycle
– High humidity condensation
– Salt spray test
– Strong wind and sand
SYSTEM SAFETY, LONGEVITY, EFFICIENCY
HyperStrong uses advanced digital and intelligent technologies to improve system safety and reduce system maintenance costs.
R&D INNOVATION
Multi-disciplinary R&D team composed of well-educated professionals with more than 70% with master’s degree and above, involved in a number of national and industrial standards.
R&D Staffs
with focus on technology innovation
Core Technology Patents
HyperStrong has various independent intellectual property rights from core parts to system
Software Copyrights
Covering
Battery system evaluation system
Thermal management simulation technology
Remote monitor
Big data analysis
etc.
HyperStrong Testing Center
HyperStrong testing center was established in 2016 with a total investment of more than 100 million RMB. It has the ability to conduct multi-dimensional testing and verification of electricity, heat, force, and safety for BESS.
National Certificates & Industrial honors
CNAS, CMA certification and a number of internationally-certified witness lab qualifications
HyperStrong has been proven to have the highest round-trip efficiency of 87.16% for 100MW scale BESS.
Ultimate Safety
Smart & Efficient
Outstanding Longevity
Wide Application
1500V Air-cooled Battery Rack
1500V Air-cooled BESS
Liquid-cooled battery Rack
1500V Liquid-cooled BESS
Power Type Energy Storage System
Power Type Energy Storage System
Safety Warning
Periodic data comparison, simultaneous data analysis and risk early warning.
Asset Management
Battery life cycle monitoring and prediction ensure asset safety.
Remote Maintenance
Remote real-time monitoring, Low maintenance cost, high & accurate troubleshooting.
Smart Operation
Multi-dimensional data analysis, one-stop data mining and operation decision digitalization.
Cloud and Terminal Computing
Combine machine learning ability and terminal computing ability keep energy storage assets at the optimal condition through FOTA.
Battery Strategy Optimization Algorithm
Integrate control protection, heat management, safety warning and other algorithms to ensure asset safety and improved asset value.
Massive Data Analysis in VRDB
Combine with laboratory test data and historic event data, monitor operating state of energy storage power station in real time.
Application
HyperStrong has delivered over 8GWh System Integration for more 300 energy storage design and application projects in the past decade, with dozens of large-scale energy storage power station projects at or over 100MW/200MWh.
The outstanding delivery has won us recognition from the industry and clients, as well as the increasing market share.
ENERGY STORAGE CAPACITY 101MW/202MWh
A new type energy storage technology innovative power station that adopts HyperSafe series solid-state battery, HyperA2 series 1500V air-cooled and HyperL2 series liquid-cooled lithium iron phosphate energy storage system.
BUSINESS MODEL
Carry out market-oriented management, participate in spot market with transaction of the electric power market and provide the electric power market with peak load regulation, frequency modulation and other auxiliary services.
ENERGY STORAGE CAPACITY 20MW/80MWh
“Source-grid-load-energy storage” project that deploys HyperA2 series air-cooled lithium iron phosphate energy storage system with efficient intelligent EMS. The project offers quick response to meet the scheduling need of grid.
BUSINESS MODEL
Based on hourly electricity price (tariffs), demand charge management, demand response and other applications, BESS project reduces user’s electricity cost with income return. Meanwhile, It can be used as stand-by power to improve electrical reliability and stability.
ENERGY STORAGE CAPACITY
1MW/2MWh
It is a mobile energy storage power system deployed with HyperA2 series air-cooled lithium iron phosphate energy storage system, supporting cloud monitoring and friendly human-computer interactive function for quick field operation and maintenance.
BUSINESS MODEL
It is mainly used for emergency power outage, ev/phev road assistance, and secure power supply for big events, conference. It is supporting cloud monitoring and friendly human-computer interactive function for quick field operation and maintenance.
Testing Center
The testing center possesses multi-dimensional research and development, testing and verification as well as comprehensive technical service capabilities for batteries and core parts of BMS.
HyperStrong CNAS Laboratory
As a leading energy storage system integrator and service provider, HyperStrong invested nearly RMB 100 million in the manufacture basement in Fangshan District, Beijing in 2016 to build an experimental center covering an area of 6,500 square meters. The center was officially accredited by the China National Accreditation Service for Conformity Assessment (CNAS) in December 2018.
Multiple official certifications
CNAS and CMA dual certification and a number of internationally certified witness lab qualifications
Multi-dimensional Testing Capability
More than 100 million RMB in total investment, hundreds of batteries and products, large amount of testing and evaluation data
The experimental center has a lot of test equipment and professional scientists. At present, the experimental center has conducted detailed tests and evaluations on hundreds of products from more than 40 battery companies, accumulated a large amount of experimental data, and formed a complete life cycle test and evaluation system for energy storage system-related products.
In the future, the HyperStrong Experimental Center will continue to optimize the test and evaluation system and provide technical support for the company’s new product development. At the same time, HyperStrong will also work with partners to promote carbon-neutral construction.
